Elimination Of Impact Crusher Failure

Elimination Of Impact Crusher Failure

Guide: For the failure of equipment production, it is necessary to eliminate it in time and restore the performance of the equipment. This is also true for the impact crusher. The occurrence of the fault will delay the production process. In order to better eliminate the fault, here is Let us introduce how to deal with common faults in the production of this machine.

For a professional manufacturer, not only to manufacture superior products, but also to provide comprehensive services, we are such a manufacturer, its mining equipment has excellent performance, and for any of the machines encountered in the production We can all provide reasonable help. Here is an analysis of the common problems we encountered when the impact crusher was working.

Problem 1. The phenomenon of bearing heating. This phenomenon indicates that the bearing has a lack of oil and needs to be refueled in time. In addition, if there is more oil in the bearing of the impact crusher during production, there will be heat. Therefore, when refueling, be sure to pay attention to its oil level, add it according to the requirements. There is also a situation that the damage of the bearing of the equipment will also cause heat. At this time, it needs to be replaced in time to prevent production. A greater impact;

Problem 2: Abnormal vibration phenomenon, the reason for this phenomenon is more: (1) The material particles are larger, it is necessary to check the feed size, and add materials according to the production demand of the impact crusher; (2) Caused by uneven wear, this time need to replace the worn parts; (3) caused by rotor imbalance, this time need to adjust the rotor; (4) caused by improper basic treatment, this time you need to check the anchor bolts and Reinforce

Problem 3: The phenomenon of belt reversal, this current causes mainly have three aspects: (1) caused by belt wear, which needs to be replaced at this time; (2) caused by belt assembly problems, this time need to adjust the pulley On the same plane; (3) the quality of the V-belt of the impact crusher itself is problematic, and to solve this problem, it is necessary to pay attention to the quality of the inspection when purchasing;

Problem 4: The finished product is large. There are three main factors in this phenomenon: (1) caused by the wear of the hammer. At this time, the treatment method is to adjust or replace the hammer of the impact crusher; (2) hammer The gap between the head and the counterattack plate is too large. At this time, the gap is adjusted, generally adjusted to 15-20mm. (3) The excessive particle size of the feed will also affect the discharge size, so it needs to be based on the material input requirements of the equipment. To add boring;

The article mainly introduces the troubleshooting of the impact crusher. We have the problem of coups, mainly the causes and solutions of several common faults when the machine is working. These introductions are mainly to help everyone more. Faster and faster handling of faults in the production of the machine, recovery period performance.

Related Articles

  1. Fine Jaw Crusher
  2. Stone Crusher Machine Cost
  3. Granite Stone Crushers

Related Machine